Description
With a maximum range of 100 meters and a 300 meter depth rating the Sea Scan Echo is ready to go. Its shielded design and filtering capability minimize noise effect to maximize system performance. Shipped fully terminated and tested to ready to run out of the box. The Sea Scan Echo communicates with the host computer over an RS-232 serial connection in NMEA 0183 format using standard ASCII Characters. In Auto Trigger mode the Sea Scan Echo can operate independently from its host system or you can allow it to sync with your sonar. The sonar will then wait for the Sync input and ping rate timer to initiate data collection at rates up to 5 Hertz.
Additional information
| Area of Application | ROV/AUV altitude, obstacle avoidance, monitoring |
|---|---|
| Minimum range {m} | 0.5 |
| Addres | Marine Sonic Technology 120 Newsome Dr, Suite H, PO Box 1309 23692-1309 Yorktown |
| Brand | Marine Sonic Technology |
| Pressure sensor | N |
| Sound velocity input | N |
| Stand alone mode | Y |
| Data storage | External |
| Slant range correction | N |
| Data flow | Continous, Triggered, Both |
| Output data format | NMEA |
| Depth rating {m} | 300 |
| Maximum range {m} | 100 |
| Telemetry | Digital |
| Power Supply [V] | 11.5VDC to 20VDC – 500 mA peak, 25 mA average. |
| Max. Operating frequency [kHz] | 540 |
| Beamwidth {deg} | 6 |
| Chirp | Y |
| Min. Operating frequency [kHz] | 540 |
| Max. operation temperature [°C} | 60 |
| Housing material | PVC |
| Min. operation temperature [°C} | 40 |
| Length [m] | 0.0467 |
| Width [m] | 0.0332 |
| Output interface | RS-232 serial |
| Operating current | .25 |
| URL |
