INNOMAR Technologie Innomar standard-rov SBP
$ 0,00
The Innomar standard-rov sub-bottom profiler acquires full-waveform data in water depths up to 2,000 meters. Transducer altitude above seafloor is from less than two meters up to 400 metres. The layer resolution is better than 10cm and seabed penetration is up to 50 meters, depending on sediment type and noise level. The built-in active beam stabilisation significantly improves data quality while the vehicle is following the seabed contour.
Description
The Innomar standard-rov sub-bottom profiler acquires full-waveform data in water depths up to 2,000 meters. Transducer altitude above seafloor is from less than two meters up to 400 metres. The layer resolution is better than 10cm and seabed penetration is up to 50 meters, depending on sediment type and noise level. The built-in active beam stabilisation significantly improves data quality while the vehicle is following the seabed contour.
The Innomar standard-rov data can be processed with any seismic software (SEG-Y format), but Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Latest product generation 2017.
Additional information
| Product type | Parametric Sub-Bottom Profiler |
|---|---|
| Connections | LAN |
| Roll corrected | N |
| Heave corrected | Y |
| Power output [W] | 3000 |
| Source Level | > 240 dB |
| Data displayed | depth, echo plot |
| Main use | route surveys, geological surveys for dredging and building site surveys |
| Data output | depth, SBP raw data |
| Formats | NMEA, ASCII, SEG-Y |
| Data output for seafloor classification | N |
| Internal logging | Hard drive |
| Dynamic range [dB] | 180 |
| Post-processing | Innomar ISE Software or any SEG-Y software |
| Remote operation | Y |
| External heave input | Y |
| External roll input | Y |
| External pitch input | Y |
| External positioning input | Y |
| Marking of events | Y |
| Real time coupling to survey software | Y |
| Coupling to post-processing software | Y |
| Brand | INNOMAR Technologie |
| Pitch corrected | Y |
| Max. pulse length [s] | 0.0015 |
| Year of initial development | 2003 |
| Width of logging unit [m] | 0.28 |
| Application | Deep sea |
| Max power consumption [W] | 250 |
| Power type | AC, DC |
| Transducer weight [kg] | 32 |
| Transducer length [m] | 0.47 |
| Transducer width [m] | 0.47 |
| Transducer height [m] | 0.06 |
| Weight of logging unit [kg] | 58 |
| Length of logging unit [m] | 0.75 |
| Height of logging unit [m] | 0.28 |
| Max. pulse rate [Hz] | 40 |
| Size (Deck unit) | Any PC |
| Platform type | ROV, Towed, AUV |
| Operating System | Windows |
| Min. depth of operation [m] | 1 |
| Max. depth of operation [m] | 2000 |
| Min. frequency [Hz] | 5000 |
| Max. frequency [Hz] | 100000 |
| Signal composition | Broadband, Dual Frequency |
| Max. resolution [m] | 0.05 |
| Max. penetration [m] | 40 |
| Addres | INNOMAR Technologie Schutower Ringstr, 4 18069 Rostock Germany |
