INNOMAR Technologie Innomar Medium-100 SBP
$ 0,00
The Innomar medium-100 sub-bottom profiler acquires full-waveform data in water depths from two meters down to 2,000 metres. The layer resolution is better than 10cm and seabed penetration is up to 70 meters, depending on the sediment type and noise level. Main applications are in coastal and shelf areas, the built-in active beam stabilisation significantly improves data quality in rough weather conditions.
Description
The Innomar medium-100 sub-bottom profiler acquires full-waveform data in water depths from two meters down to 2,000 metres. The layer resolution is better than 10cm and seabed penetration is up to 70 meters, depending on sediment type and noise level. Main applications are in coastal and shelf areas, the built-in active beam stabilisation significantly improves data quality in rough weather conditions.
The system is portable to be used on vessels of opportunity with very fast and easy mob/demob. The transducer can be pole-mounted or deployed in a moon-pool. For permanent hull-mounting a mounting frame with optimized shock absorbers is available.
The Innomar medium-100 data can be processed with any seismic software (SEG-Y format), but Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Included features:
- Heave compensation and Roll beam stabilization (external sensor required)
- 24 bit SLF full waveform data acquisition (sub-bottom data)
- Multi-ping mode for maintaining a high pulse rate in deep waters
- Multi-frequency signals
- CW pulses with user selectable centre frequency (3.5 …15kHz) and bandwith
- LFM chirp (5 – 15 kHz)
Latest product generation 2020.
Additional information
Product type | Parametric Sub-Bottom Profiler |
---|---|
External pitch input | Y |
Transmit Transducers | 1 transducer, used as transmitter and receiver |
Cable length | 30m |
Data displayed | Depth, echo plot |
Main use | High-resolution seabed exploration for dredging; route and building-site surveys |
Data output | Raw data; depth |
Formats | Innomar binary (raw, ses3), SEG-Y, NMEA, ASCII |
Data output for seafloor classification | N |
Connections | LAN, Monitor, RS232, USB, VGA |
Internal logging | Hard drive |
Post-processing | Innomar ISE software or any SEG-Y software |
Remote operation | Y |
External heave input | Y |
External roll input | Y |
External positioning input | Y |
Source Level | > 247 dB |
Marking of events | Y |
Real time coupling to survey software | Y |
Coupling to post-processing software | Y |
Dimensions | depends on vessel |
Weight | N/A |
Depth rating | N/A |
Model | transducer included |
Height [m] | 0.15 |
Length [m] | 0.5 |
Width [m] | 0.5 |
Weight in Air | 60 |
Tow speed | N/A |
Brand | INNOMAR Technologie |
Addres | INNOMAR Technologie Schutower Ringstr, 4 18069 Rostock Germany |
Pulse Repetition Rate | 40 |
Frequency | Dual, Wide band |
Year of initial development | 2004 |
Size (Deck unit) | 19'', 9U |
Application | High Resolution |
Max power consumption [W] | 400 |
Power type | AC |
Transducer weight [kg] | 40 |
Transducer length [m] | 0.5 |
Transducer width [m] | 0.5 |
Transducer height [m] | 0.15 |
Weight of logging unit [kg] | 44 |
Length of logging unit [m] | 0.52 |
Width of logging unit [m] | 0.4 |
Height of logging unit [m] | 0.44 |
Portability of logger | Desktop, Rack |
Power requirements | 100 – 240V AC |
Platform type | Hull Mounted, Side Mounted, Pole Mounted |
Heave corrected | Y |
Operating System | MS Windows |
Min. depth of operation [m] | 2 |
Max. depth of operation [m] | 2000 |
Min. frequency [Hz] | 2000 |
Max. frequency [Hz] | 22000 |
Signal composition | Broadband, Chirp, Dual Frequency |
Power output [W] | 5500 |
Max. resolution [m] | 0.05 |
Max. penetration [m] | 70 |
Max. pulse rate [Hz] | 40 |
Max. pulse length [s] | 0.0035 |
Dynamic range [dB] | 230 |
Pitch corrected | N |
Roll corrected | Y |
URL | http://surveydrones.net/sub-bottom-profilers/www.innomar.com |