Inertial Labs IMU-NAV-100
$ 0,00
The Inertial Labs IMU-NAV is a breakthrough, fully integrated inertial solution that combines the latest MEMS sensor technologies. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the IMU contains up to 0.5 deg/hr gyroscopes and 0.003 mg bias in-run stability accelerometers with very low noise and high reliability.
Description
The Inertial Labs Inertial Measurement Unit (IMU-NAV) is the latest addition to the Inertial Labs Advanced MEMS sensor-based family. Revolutionary due to its compact, self-contained strapdown, tactical grade Inertial Measurement Systems and Pitch & Roll Sensor, that measures linear accelerations, angular rates, Pitch & Roll with three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. Angular rates and accelerations are determined with high accuracy for both motionless and dynamic applications.
Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements make the Inertial Labs IMU-NAV easy to use in a wide range of higher order integrated system applications.
The Inertial Labs IMU-NAV models were designed for applications, like:
- Antenna and Line of Sight Stabilization Systems
- Passenger trains acceleration / deceleration and jerking systems
- Motion Reference Units (MRU)
- Motion Control Sensors (MCS)
- Gimbals, EOC/IR, platforms orientation and stabilization
- GPS-Aided Inertial Navigation Systems (INS)
- Attitude and Heading Reference Systems (AHRS)
- Land vehicles navigation and motion analysis
- Buoy or Racing Boat Motion Monitoring
- UAV & AUV/ROV navigation and control
Additional information
| Year of last update | 2021 |
|---|---|
| Alignment Error [ ± ° ] | 0.0086 |
| Pitch and Roll dynamic accuracy [ ° ] | 0.06 |
| Pitch and Roll static accuracy [ ° ] | 0.03 |
| Num. of Gyroscopes | 3 |
| Range [± ° / sec] | 950 |
| In-Run Bias Stability [ °/ hr] | 0.5 |
| Bandwidth [ Hz ] | 260 |
| Non-linearity [ % ] | 0.015 |
| Resolution [ ° / s ] | 0.01 |
| Max. rotation speed [deg/s] | 950 |
| Noise | 0.025 m/sec/√hr |
| Distinguishable features | ITAR free, Navigation Grade, MIL-STD-810G compliant |
| Application | Antenna and Line of Sight Stabilization Systems ❖ Passengers trains acceleration, deceleration and jerking systems ❖ Motion Reference Units (MRU) ❖ Motion Control Sensors (MCS) ❖ Gimbals, EOC/IR, platforms orientation and stabilization ❖ GPS-Aided Inertial Navigation Systems (INS) ❖ Attitude and Heading Reference Systems (AHRS) ❖ Land vehicles navigation and motion analysis ❖ Buoy or Racing Boat Motion Monitoring ❖ UAV & AUV/ROV navigation and control |
| Num. of Accelerometers | 3 |
| Range [max g] | 40 |
| In-Run Bias Stability [mg] | 0.015 |
| Brand | Inertial Labs |
| Addres | Inertial Labs 39959 Catoctin Ridge Street 20129 Paeonian Springs United States |
| Start up time [s] | 1 |
| Output frequency [ Hz ] | 2000 |
| Year of initial development | 2020 |
| Power consumption [W] | 0.8 |
| System components | Accelerometer(s), Gyroscope(s), Temperature sensor |
| Height [mm] | 59.2 |
| Width [mm] | 48.2 |
| Length [mm] | 48.2 |
| Weight [gr] | 155 |
| Min. Voltage (DC) | 5 |
| Max. Voltage (DC) | 30 |
| Min. operating temperature [C] | -40 |
| Output data formats | Accelerations, Angular rates, Pitch, Roll, Relative Heading, Temperature, Synchronization output |
| Max. operating temperature [C] | 85 |
| Splashproof casting | Y |
| Water resistant casting | N |
| Casting and coating | IP67 |
| Vibration | 7g, 20 – 2000 Hz |
| Shock | 1500g |
| Interface types | Digital |
| Interfaces | RS-322, RS-422 |
| URL |
