Description
The CXTA single- and dual-axis analog tilt sensors offer resolution, accuracy, and fast response in an inexpensive, easy-to-use package. The CXTA series design centers on a highly stable silicon micro-machined capacitive inclination sensor element. The CXTA series is fully signal conditioned with high level analog output(s), and optional analog temperature signal.
Additional information
| System components | Gyroscope(s) |
|---|---|
| Pitch and Roll static accuracy [ ° ] | 0.5 |
| Brand | ACEINNA |
| Application | Scissor Lifts, Static Platforms, Survey Leveling Equipment, Laser Leveling |
| Distinguishable features | The CXTA Series Tilt Sensors use a micro-machined acceleration sensing element with a DC response to measure inclination relative to gravity, The response of the tilt sensor depends on the magnitude of gravity parallel to the sensor element, The output of the tilt sensor will be an offset voltage plus the voltage response proportional to the amount of gravity measured by the sensor. |
| Pressure sensor | N |
| Alignment Error [ ± ° ] | 1 |
| Non-linearity [ % ] | 0.4 |
| Bandwidth [ Hz ] | 50 |
| Resolution [ ° / s ] | 0.05 |
| Range [± ° / sec] | 75 |
| Num. of Gyroscopes | 2 |
| Pitch and Roll dynamic accuracy [ ° ] | 2 |
| Interface types | Analog |
| Height [mm] | 24.1 |
| Max. rotation speed [deg/s] | 75 |
| Casting and coating | Nylon, Aluminum |
| Max. operating temperature [C] | 85 |
| Min. operating temperature [C] | -40 |
| Operating shock tolerance [g] | 2000 |
| Power consumption [W] | 0.24 |
| Max. Voltage (DC) | 30 |
| Min. Voltage (DC) | 6 |
| Weight [gr] | 65 |
| Length [mm] | 30.5 |
| Width [mm] | 50.8 |
| Addres | ACEINNA One Tech Drive, suite 325 Ma 01810 Andover |
