Description
Rugged Receiver Enclosure
The Trimble BX982 GNSS receiver enclosure is a multi-channel, multi-frequency OEM GNSS receiver which allows OEM’s and System Integrators to rapidly integrate centimeter-level positioning and precise heading into their application. The Trimble BX982 supports GPS L1/L2/L5, GLONASS L1/L2/L3, and BeiDou B1, B2 signals. In addition, Trimble is committed to the next generation of modernized GNSS configurations by providing GALILEO compatible products available for customers well in advance of GALILEO system becoming operational. In support of this, the Trimble BX982 is capable of tracking Galileo signals for evaluation and test purposes.2
Dual-Antenna Input
Single antenna GNSS systems have difficulty determining where the antenna is positioned relative to the vehicle and object of interest, especially when dynamics are low. External sensors can be used to augment this however these tend to drift when static. Heading derived from dual-antenna GNSS measurements overcomes these issues and is now economically the right choice. The BX982 harnesses the power of the 220 channel Trimble MaxwellTM 6 Technology with dual chips supporting two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed. A single connection to the BX982 via RS232, USB, Ethernet, or CAN delivers both centimeter accurate positions and less than a tenth of a degree (2-meter baseline) heading accuracy.
Flexible Interfacing
The Trimble BX982 was designed for easy integration and rugged dependability. Customers benefit from the Ethernet connectivity available on the board, allowing high-speed data transfer and configuration via standard web browsers. Just like other Trimble embedded technologies; easy to use software commands simplify integration and reduce development times. All software features are password-upgradeable, allowing functionality to be upgraded as your requirements change.
High Integrity
The BX982 supports Fault Detection and Exclusion (FDE) and Receiver Autonomous Integrity Monitoring (RAIM) for safety-critical applications.
Additional information
| Type | Aerial, Land, Marine |
|---|---|
| Communication ports | 1 x USB, 1 x CAN, 1 x Ethernet, 3 x RS232 |
| Reacqisition time [s] | |
| RTK Network Compatibility | Yes |
| code: DGNSS/RTC (constant part) [m] | 0.25 |
| code: DGNSS/RTC (variable part) [ppm] | 1 |
| phase: RTK rapid static (constant part) [m] | 0.008 |
| phase: RTK rapid static (variable part) [ppm] | 1 |
| Initialization time on the fly [s] | |
| PPS Out | Y |
| Tracked satellite signals | GPS, L1 C/A, L2E, L2C, L5; BeiDou, B1, B2; GLONASS, L2 C/A, L3 CDMA; Galileo, E1, E5A, E5B, E5AltBOC; QZSS, L1 SAIF, L1C, L5; SBAS, L5 |
| Bluetooth | N |
| NMEA output format | ASCII, NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS |
| other output formats | Binary, Trimble GSOF |
| L-Band Compatible | Yes |
| Distinguishable features | Dual-Antenna GNSS Module for Precise Position and Heading Applications |
| Brand | Trimble OEM GNSS |
| Addres | Trimble OEM GNSS 10368 Westmoor Dr 80021 Westminster United States |
| SBAS differential signals | WAAS, EGNOS, MSAS, GAGAN, SDCM |
| Max. simultaneous tracked channels | 220 |
| Year of initial introduction | 2011 |
| Typical consumption [W] | 5 |
| Height [m] | 0.055 |
| Depth [m] | 0.14 |
| Width [m] | 0.261 |
| Total Weight [kg] | 1.6 |
| Housing Material | Aluminum |
| Operating power: min. [V] | 9 |
| Operating power: max. [V] | 28 |
| Connectors | D-sub DE9, DA26, TNC Female |
| No. channels | 220 |
| Certifications | FCC, CE, IC, E-mark |
| Operating temperature: min. [°C] | -40 |
| Operating temperature: max. [°C] | 70 |
| Humidity resistance | 5% to 95% non-condensing |
| Water sand and dust proof | IP67 |
| Shock and vibration proof | MIL810D/F |
| ROHS compliance | Y |
| WEEE compliance | Y |
| URL |
