MicroStrain Sensors 3DM-GX5-15
$ 0,00
The 3DM®-GX5-15 is the smallest and lightest industrial VRU available. It features a triaxial accelerometer, gyroscope, and temperature sensors to achieve the optimum combination of measurement qualities.
The 3DM-GX5-15 is ideally suited for a wide range of applications, including platform stabilization antenna pointing and usage monitoring.
Description
The LORD Sensing 3DM-GX5 family of high-performance industrial grade inertial sensors provides a wide range of triaxial inertial measurements and computed attitude and navigation solutions. In all models, the Inertial Measurement Unit (IMU) includes direct measurement of acceleration and angular rate. All sensors are fully temperature compensated and calibrated over the operating temperature. The use of Micro- Electro- Mechanical System (MEMS) technology allows for highly accurate, small, lightweight devices. The LORD Sensing MIP Monitor software can be used for device configuration, live data monitoring, and recording. Alternatively, the MIP Data Communications Protocol is available for development of custom interfaces and easy OEM integration.
Additional information
System components | Accelerometer(s), Gyroscope(s), Temperature sensor, Pressure sensor |
---|---|
Range [± ° / sec] | 300 |
Addres | MicroStrain Sensors Hurricane Lane, Suite 102, 05495 Williston United States |
Brand | MicroStrain Sensors |
In-Run Bias Stability [mg] | 0.04 |
Resolution [mg] | 0.02 |
Range [max g] | 8 |
Application | Platform stabilization, artificial horizon, Health and usage monitoring of vehicles |
Distinguishable features | Fully calibrated, temperature-compensated, and mathematically-aligned to an orthogonal coordinate system for highly accurate outputs |
Pressure sensor | Y |
Noise | Noise density, 25 µg/√Hz (2 g) |
Resolution [ ° / s ] | 0.003 |
Alignment Error [ ± ° ] | 0.05 |
Non-linearity [ % ] | 0.02 |
Bandwidth [ Hz ] | 225 |
In-Run Bias Stability [ °/ hr] | 8 |
Heading static accuracy [ ° ] | 0.5 |
Height [mm] | 11.1 |
Non-operating shock tolerance [g] | 5000 |
Width [mm] | 36.6 |
Length [mm] | 36 |
Weight [gr] | 16.5 |
Min. Voltage (DC) | 4 |
Max. Voltage (DC) | 36 |
Power consumption [W] | 0.5 |
Operating shock tolerance [g] | 500 |
Pitch and Roll dynamic accuracy [ ° ] | 2 |
Min. operating temperature [C] | -40 |
Max. operating temperature [C] | 85 |
Interface types | Digital |
Other interfaces and additional information | USB 2.0 (full speed), RS232 (9, 600 bps to 921, 600 bps, default 115, 200), Data/power output, micro-DB9 |
Output frequency [ Hz ] | 500 |
Max. rotation speed [deg/s] | 300 |
URL |