MicroStrain Sensors 3DM-GX5-10
$ 0,00
The 3DM®-GX5-10 is the smallest and lightest industrial IMU available. It features a fully calibrated and temperature compensated triaxial accelerometer and gyroscope to achieve the optimum combination of measurement qualities under all dynamic conditions.
Description
The LORD Sensing 3DM-GX5 family of high-performance, industrial-gradeinertial sensors provides a wide range of triaxial inertial measurements and computed attitude and navigation solutions.
In all models, the Inertial Measurement Unit (IMU) includes direct measurement of acceleration and angular rate, and are fully temperature-compensated and calibrated over the operating temperature. The use of Micro- Electro- Mechanical System (MEMS) technology allows for highly accurate, small, lightweight devices.
The LORD Sensing MIP Monitor software can be used for device configuration, live data monitoring, and recording. Alternatively, the MIP Data Communications Protocol is available for development of custom interfaces and easy OEM integration.
Additional information
| Height [mm] | 11.1 |
|---|---|
| Range [± ° / sec] | 300 |
| Addres | MicroStrain Sensors Hurricane Lane, Suite 102, 05495 Williston United States |
| Brand | MicroStrain Sensors |
| In-Run Bias Stability [mg] | 0.04 |
| Resolution [mg] | 0.02 |
| Range [max g] | 8 |
| Application | Platform stabilization, artificial horizon, Health and usage monitoring of vehicles. |
| Distinguishable features | Fully calibrated, temperature-compensated, and mathematically-aligned to an orthogonal coordinate system for highly accurate outputs, High-performance, low-drift gyros with noise density of 0.005°/sec/√Hz and VRE of 0.001°/s/g² RMS. |
| Noise | Noise density, 25 µg/√Hz (2 g) |
| Resolution [ ° / s ] | 0.003 |
| Alignment Error [ ± ° ] | 0.05 |
| Non-linearity [ % ] | 0.02 |
| Bandwidth [ Hz ] | 225 |
| In-Run Bias Stability [ °/ hr] | 8 |
| Max. rotation speed [deg/s] | 300 |
| Width [mm] | 36.6 |
| Output frequency [ Hz ] | 1000 |
| Output data formats | Inertial Measurement Unit (IMU) outputs, acceleration, angular rate, delta theta, delta velocity |
| Other interfaces and additional information | RS232 (9, 600 bps to 921, 600 bps, default 115, 200) |
| Interface types | Digital |
| Casting and coating | Aluminium enclosure |
| Max. operating temperature [C] | 85 |
| Min. operating temperature [C] | -40 |
| Operating shock tolerance [g] | 500 |
| Non-operating shock tolerance [g] | 5000 |
| Power consumption [W] | 0.3 |
| Max. Voltage (DC) | 36 |
| Min. Voltage (DC) | 4 |
| Weight [gr] | 16.5 |
| Length [mm] | 36 |
| URL |
